Honigum Automix is a hydrophilic polyvinylsiloxane impression material with a patented microcrystalline wax matrix that lowers its viscosity under bite pressure to flow into the most difficult-to-reach subgingival areas.

•Slump-free starting thickness for easy tray dispensing
•Quick snap set prevents distortion, yet it is easy to remove
•Pleasant honey aroma and neutral taste make it patient friendly

Color: Blue
Set Time: Regular
Size: 50 ml
Viscosity: Heavy

Contains: 4 (50ml) Cartridges; 12 Green Automix Tips and 12 Intraoral Tips per Package

Flexitime Xtreme 2 is an enhanced version of the original single unit impression solution.

•Increased hydrophilicity
•Improved tear strength

Working Time: 30 to 90 seconds
Set Time: 90 seconds

Body/Viscosity: Heavy
Size: 380 ml

Contains: 2 Cartridges per Package

Impregum Garant Soft polyether impression material gives accurate detail in moist conditions. Great for crown, bridge, inlays, onlays, functional and implant impressions.

• Better initial hydrophilicity to provide void-free impressions in moist condition
• Soft polyether is ultra forgiving; it will not start setting before the working time ends, and then it does so immediately
• Excellent flow properties, captures fine details for precise impressions
• Less-rigid, soft polyether gives you the same great results, but is easier to remove and great for dual-arch trays
• Fresh mint flavor
• Material cuts working and setting times by at least 33%

Contains: 4 (50 ml) cartridges and 20 white mixing tips

Get accurate detail even in moist conditions with this polyether impression material.
• Excellent flow properties--captures fine details for precise impressions.
• Intrinsic hydrophilicity provides accuracy even in moist conditions, right from the start of the mix.
• "Snap-set behavior" of soft polyether is ultra-forgiving and results in precise-fitting restorations without distortion.
• Helps get an accurate impression on the first take--reducing the need for costly adjustments, remakes and retakes.
• Less rigid polyether is easier to remove, great for dual-arch trays.
Suggested Application: Crown and bridge impressions. Functional impressions.
Purple
Work Time: 1 minute
Set Time: 4 minutes
Package Contents: 2 - base paste, 300ml each; 2 - catalyst, 60ml each.

Get accurate detail even in moist conditions with this polyether impression material.
• Excellent flow properties--captures fine details for precise impressions.
• Intrinsic hydrophilicity provides accuracy even in moist conditions, right from the start of the mix.
• "Snap-set behavior" of soft polyether is ultra-forgiving and results in precise-fitting restorations without distortion.
• Helps get an accurate impression on the first take--reducing the need for costly adjustments, remakes and retakes.
• Less rigid polyether is easier to remove, great for dual-arch trays.
Suggested Application: Crown and bridge impressions. Functional impressions.
Purple
Work Time: 1 minute
Set Time: 4 minutes
Package Contents: 2 - base paste, 300ml each; 2 - catalyst, 60ml each.

Imprint 4 material is super-hydrophilic, and displaces moisture right from the start in the unset state, which helps prevent detail-disrupting voids.

• Short intra-oral setting time
• Sufficient working time for a stress-free procedure
• Clinically proven tear strength
• Fresh material colors for easier readability
• Patient-pleasing mint flavor

Contains: 10 (50 ml) cartridges

Imprint 4 material is super-hydrophilic, and displaces moisture right from the start in the unset state, which helps prevent detail-disrupting voids.

• Short intra-oral setting time
• Sufficient working time for a stress-free procedure
• Clinically proven tear strength
• Fresh material colors for easier readability
• Patient-pleasing mint flavor

Contains: 10 (50 ml) cartridges

Imprint 4 Preliminary Penta VPS Material for automix makes your procedure faster and more convenient, helping to make more accurate preliminary impressions.

• Control of time: pouring when convenient due to long-term dimensional stability and multiple pours for easy remakes of models and Provisionals
• Super Quick Intraoral set time of 1 minute and 30 seconds
• Control of procedure: high hydrophilicity for easy model pouring and easy disinfection
• Control of Impression: clean and convenient automixing for homogeneous void-free mixing
• Regular Set Time

Contains: 6 -300 ml base pastes & 6 -60 ml catalysts

Imprint 4 Preliminary Penta VPS Material for automix makes your procedure faster and more convenient, helping to make more accurate preliminary impressions.

• Control of time: pouring when convenient due to long-term dimensional stability and multiple pours for easy remakes of models and Provisionals
• Super Quick Intraoral set time of 1 minute and 30 seconds
• Control of procedure: high hydrophilicity for easy model pouring and easy disinfection
• Control of Impression: clean and convenient automixing for homogeneous void-free mixing
• Regular Set Time

Contains: 30 (50 ml) Cartridges

Imprint 4 Preliminary Penta VPS Material for automix makes your procedure faster and more convenient, helping to make more accurate preliminary impressions.

• Control of time: pouring when convenient due to long-term dimensional stability and multiple pours for easy remakes of models and Provisionals
• Super Quick Intraoral set time of 1 minute and 30 seconds
• Control of procedure: high hydrophilicity for easy model pouring and easy disinfection
• Control of Impression: clean and convenient automixing for homogeneous void-free mixing
• Fast Set Time

Contains: 30 (50 ml) Cartridges

Lab-Putty is the outstanding polysiloxane laboratory modelling product material with 62 - 67 Shore A for model repairs, isolation and denture heat protection, keys and block outs and matrixes for formation of general occlusion and functional patterns.

Contains: 40 ml Tube