Home  > Ransom & Randolph(x) In Stock
1 - 12 of 32 ▶|
View:
 
Description
Price
Quantity
Item#:
750-99203
Manufacturer Item:
99203
Manufacturer:
Ransom & Randolph
WARNING, this product contains chemicals that are known to the State of California and Maine to cause cancer, congenital disabilities, or other reproductive harm. For more information, please visit, www.p65warnings.ca.gov
Login to see price.
A fine, white general use plaster recommended for models, flasking and articulating. It may be used in any case where plaster or stone is indicated.

• Uniform quality every time
• Compressive strength and expansion properties to meet every need
• Accurate reproduction of detail
• A color palate spectrum to provide an array of options

Color: White
Set Time: Regular
Size: 25lb

Contains: 1 per Package
Item#:
750-99210
Manufacturer Item:
99210
Manufacturer:
Ransom & Randolph
Login to see price.
Item#:
750-99216
Manufacturer Item:
99216
Manufacturer:
Ransom & Randolph
WARNING, this product contains chemicals that are known to the State of California and Maine to cause cancer, congenital disabilities, or other reproductive harm. For more information, please visit, www.p65warnings.ca.gov
Login to see price.
A fine, white general use plaster recommended for models, flasking and articulating. It may be used in any case where plaster or stone is indicated.

• Uniform quality every time
• Compressive strength and expansion properties to meet every need
• Accurate reproduction of detail
• A color palate spectrum to provide an array of options

Color: White
Set Time: Fast
Size: 25lb

Contains: 1 per Package
Item#:
750-99213
Manufacturer Item:
99213
Manufacturer:
Ransom & Randolph
Login to see price.
Novocast is an advanced inlay investment that provides increased accuracy for casting conventional gold alloys at a mold temperature of 1200 degrees ferenhite without the use of a water bath.

• Sets rapidly to produce a strong, ultrasmooth mold with easy divesting
• Expansion control by varying water/powder ratio
• Technique that same for all types of castings
• 950 psi

Working Time: 3 minutes
Setting Time: 15 minutes
Mixing Ratio: 34/100
Ready for Burnout: 30 minutes
Setting Expansion: 0.45%
Thermal Expansion: 1.20%

Contains: 144 (50gm) Packets per Package
Item#:
750-01082
Manufacturer Item:
01082
Manufacturer:
Ransom & Randolph
Login to see price.
Type III dental stone
An all purpose stone for fabricating models and flasking acrylic dentures
May be used in any case where plaster or stone is indicated
Available in Regular and Fast Set formulas
Item#:
750-M499204
Manufacturer Item:
M499204
Manufacturer:
Ransom & Randolph
Login to see price.
Item#:
750-99043A
Manufacturer Item:
99043
Manufacturer:
Ransom & Randolph
Login to see price.
A special investment for non-precious and semi-precious alloys. Hi-Temp contains no carbon. Non-precious metal alloys require an investment specially compounded to:
• Compensate for alloy shrinkage
• Withstand high-fusing temperatures
• Provide a non-contaminating atmosphere
• Allow casting of a lighter-density metal
Hi-Temp is the investment with these characteristics and more. It gives a smooth surface to the casting, flows readily and evenly for fine detail and sharp margins, and has high strength to prevent damage to the mold. The technique is simple. Special Liquid Concentrate is used instead of water. Control of expansion is obtained by dilution of the Special Liquid Concentrate with water — the greater the dilution, the less the expansion of the investment. Four parts liquid to one part water is the proportion suggested to get some frictional retention for full crowns on well-tapered preparation. Otherwise, the technique is essentially the same as handling any casting investment. 
*Suggested concentration of Special Liquid Concentrate  is 75% (3 parts liquid to 1 part water).
*Recommended Liquid – Special Liquid Concentrate
Item#:
750-00663
Manufacturer Item:
00663
Manufacturer:
Ransom & Randolph
Login to see price.
A special investment for non-precious and semi-precious alloys. Hi-Temp contains no carbon. Non-precious metal alloys require an investment specially compounded to:
• Compensate for alloy shrinkage
• Withstand high-fusing temperatures
• Provide a non-contaminating atmosphere
• Allow casting of a lighter-density metal
Hi-Temp is the investment with these characteristics and more. It gives a smooth surface to the casting, flows readily and evenly for fine detail and sharp margins, and has high strength to prevent damage to the mold. The technique is simple. Special Liquid Concentrate is used instead of water. Control of expansion is obtained by dilution of the Special Liquid Concentrate with water — the greater the dilution, the less the expansion of the investment. Four parts liquid to one part water is the proportion suggested to get some frictional retention for full crowns on well-tapered preparation. Otherwise, the technique is essentially the same as handling any casting investment. 
*Suggested concentration of Special Liquid Concentrate  is 75% (3 parts liquid to 1 part water).
*Recommended Liquid – Special Liquid Concentrate
Item#:
750-00671
Manufacturer Item:
00671
Manufacturer:
Ransom & Randolph
Login to see price.
Item#:
750-330215
Manufacturer Item:
330215
Manufacturer:
Ransom & Randolph
Login to see price.
FastFire 15 is a fine grain phosphate investment that requires only a 15-minute bench set before placing molds into a hot oven for rapid burnout. It produces accurate, smooth castings using either the ringless or metal ring technique. Optimum fit is achieved for all crown and bridge alloys through dilution of the freeze-stable FastFire liquid.

• 15-minute bench set
• 30-minute or overnight burnout
• Mixing ratio: 27/100
• Working time: 7-9 minutes
• Setting expansion: 1.0%
• Thermal expansion: 1.0%
• 500 psi

Size: 90g

Contains: 25 Packets per Box
Item#:
750-38097
Manufacturer Item:
38097
Manufacturer:
Ransom & Randolph
Login to see price.
FastFire 15 is a fine grain phosphate investment that requires only a 15-minute bench set before placing molds into a hot oven for rapid burnout. It produces accurate, smooth castings using either the ringless or metal ring technique. Optimum fit is achieved for all crown and bridge alloys through dilution of the freeze-stable FastFire liquid.

• 15-minute bench set
• 30-minute or overnight burnout
• Mixing ratio: 27/100
• Working time: 7-9 minutes
• Setting expansion: 1.0%
• Thermal expansion: 1.0%
• 500 psi

Size: 60g

Contains: 25 Packets per Box
Item#:
750-38089
Manufacturer Item:
38089
Manufacturer:
Ransom & Randolph
Login to see price.
1 - 12 of 32 ▶|
View:

 

Authorized Distributor of Over 80,000 Products from Over 600 Manufacturers

 

Shop for dental supplies and equipment from industry-leading manufacturers such as 3M Health Care (now Solventum), Dentsply Sirona, Kerr, HuFriedy Group, Septodont, Ivoclar, GC America, Cranberry, Midmark, Vatech America, Solmetex, DentalEZ, DEXIS, Premier Dental, Belmont Dental, DCI, and more. Additionally, DHP offers an extensive catalog of private label DHP Brand Dental Supplies.

DHP’s online dental supply store is user-friendly, providing great prices on commonly used items such as nitrile gloves, face masks, teeth whitening products, anesthetics, dental dams, mouthwash, disinfectant sprays and wipes, carbide burs, disposable prophy angles, fluoride varnish, bulk flow composites, latex gloves, Crest Oral B products, sterilization pouches, and much more.

If you have questions, please call 800.626.2163 to speak with an experienced Account Manager or Customer Service Representative. They will work with you and our team to select the best dental supplies, equipment, and practice solutions for your needs.