The OTA right-angled driver makes it easy to place posterior screws in the mandible or maxilla. Because its manually driven, theres no need to connect it to a handpiece. For maximum access and comfort, you can rotate the head to the exact angle you need. The OTA right-angled driver is priced hundreds of dollars less than competitive units. -ATA Torque adapator sold separately.

Contains: 1 per Package

Adjustable Torque Adapter for Right Angled Driver

Contains: 1 per Package

Grasping forceps, Russian model, 6" in length, and is used to grasp and stabilize soft tissue, and made in Germany from 100% German stainless steel.

Contains: 1 per Package

Self aspirating syringe holds 1.8cc. Lightweight and features a comfort fitting thumb ring that provides a secure grip for multiple hand sizes. The self-aspirating mechanism works by a little bump at the end of the syringe compressing the diaphragm of the anesthetic cartridge during injection. When the pressure of injection is released there is the relaxation of the diaphragm, thus creating negative pressure. In self-aspirating needles and syringe system, aspiration can occur only after injection has been started. Made in the United States from 100% USA stainless steel.

Contains: 1 per Package

Used to inject a local anesthetic. Has a threaded tip, barrel, rod/plunger with a harpoon attached that embeds itself into the rubber stopper of the carpule. Comfort grip finger rest and thumb ring. The harpoon allows the dentist to aspirate (draw back) the injection site to ensure the needle tip is in the correct location before injecting the anesthetic solution.

•Made in the USA from 100% 440A stainless steel.

Contains: 1 per Package

Adson serrated tissue forceps measures 4 3/4" in length and is used to grasp and stabilize soft tissue, and made in Germany from 100% German stainless steel.

•Standard

Contains: 1 per Package

Square Bits Kit, Short, Set of 7 Contains the following 18mm length bits to be used in manual drivers.

Kit Includes the Following:
•BIT 703 - is a Straight Screwdriver square bit that works with Straight Systems
•BIT 706 - is a SCS Screwdriver square bit, for Straumann systems
•BIT 709 - is a Unigrip Driver square bit, used with Replace Select systems
•BIT 712 - is a Hex 1.25mm/.050" square bit used with Lifecore, BioHorizons, Camlog, Astra, Zimmer, Cortex, Implant Direct, MIS, Sybron, and Implant Logistics systems.
•BIT 715 - is a Hex 1.2mm/.048" square bit used with 3i Systems
•BIT 718 - is a Hex 0.9mm/.035" square bit used with Friadent, Ankylos, 3i Cover Screw systems
•BIT 721 - is a Square 1.3mm/.050" square bit used with Gold Screw/Nobel Biocare systems

Square Bits Kit, Medium, Set of 7 Contains the following 23mm length bits to be used in manual drivers.

Kit Includes the Following:
•BIT 704 - is a Straight Screwdriver square bit that works with Straight Systems
•BIT 707 - is a SCS Screwdriver square bit, for Straumann systems
•BIT 710 - is a Unigrip Driver square bit, used with Replace Select systems
•BIT 713 - is a Hex 1.25mm/.050" square bit used with Lifecore, BioHorizons, Camlog, Astra, Zimmer, Cortex, Implant Direct, MIS, Sybron, and Implant Logistics systems.
•BIT 716 - is a Hex 1.2mm/.048" square bit used with 3i Systems
•BIT 719 - is a Hex 0.9mm/.035" square bit used with Friadent, Ankylos, 3i Cover Screw systems
•BIT 722 - is a Square 1.3mm/.050" square bit used with Gold Screw/Nobel Biocare systems

The Hex 0.9mm/.035" square bit is for use in manual drivers and is compatible with Friadent, Ankylos, 3i Cover Screw.

•Large square bit measures 39mm in length

Contains: 1 per Package

The 1.3mm/.050" square bit is compatible with Gold Screw/Nobel Biocare and made in the United States and fully autoclavable.

•Small square bit measures 18mm in length

Contains: 1 per Package